Call us at 0086 13850078313

Our Product Detail

Welcome to our website!

_
_

Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation

Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation can be visually described using a water tower connected to a water pipe

Download instructions

Products Details

Description of this Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation

Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation can be visually described using a water tower connected to a water pipe. The water tower can be used to "storage" the water pressure - when the water supplied by the water supply system exceeds the amount of water required by the town, the excess water will be stored in the water tower. Then, when the demand for water is high, excess water will flow out of the water tower to maintain water pressure. The electrons are stored in the same way, and the electrons can be released later. Capacitors are used to store power for high speed release. This feature is used by the flash. Motor capacitors also use this technique to achieve very bright, instantaneous flash effects.

Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation also eliminates pulsations. If the line that conducts the DC voltage contains pulsations or spikes, the bulk capacitor can smooth the voltage by absorbing peaks and filling the valleys. Capacitors can block DC. Displacement motor running AC capacitor, if a smaller capacitor is connected to the battery, after the capacitor is completed (the capacitor process is small, the charging process can be completed in an instant), no current will flow between the two poles of the battery. However, any alternating current (AC) signal can flow unimpeded through the capacitor. The reason is that as the AC current fluctuates, the Motor running AC capacitor continuously charges and discharges as if the AC current is flowing. A shunt capacitor is a reactive power compensation device. Usually (centralized compensation) is connected to the low-voltage busbar of the substation, its main function is to compensate the reactive power of the system, improve the power factor, thereby reducing power loss, improving voltage quality and equipment utilization. Often used in conjunction with on-load tap-changer.

Parameter of this Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation

Product type

Electronic Motor Capacitor

Capacitance range

3uF~120uF

Capacitance deviation

±5% or according to customers’ requests.

Rated Voltage

200VAC,250VAC,370VAC,400VAC,440VAC,450VAC,

500VAC,550VAC,630VAC,600VAC

Rated frequency

50/60Hz

Operating Temperature

-40°C~+85°C

Class of safety protection

P1, P2

Testing voltage

T-T:2.0Un/60S

Insulation resistance

>=3000s

Tangent of loss angle of a capacitor

tanσ≤0.002 (100Hz)

Life Span

Class A,Class B(10000h), Class C(3000h)

Size According to chart or users requirement

Image of this Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation

 

Recommend of this Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation

 

 

Looking forward to your inquiry for this Hwashi Motor Run AC Capacitors Cover Steel Plate Spot Welding Machine installation.

 

LEAVE A MESSAGE